Topics: Design , Geometry , Optimization , Particle swarm optimization , Pressure , Shapes , Shells , Weight (Mass) , Cross section (Physics) , Finite element model

Effect of Pipe Bend Configuration on Guided Waves-Based Defects Detection: An Experimental Study

Jing Ni, Shaoping Zhou, Pugen Zhang, Yong Li

J. Pressure Vessel Technol. April 2016, 138(2): 021203. doi: https://doi.org/10.1115/1.4031547

Abstract

View articletitled, Effect of Pipe Bend Configuration on Guided Waves-Based Defects Detection: An Experimental Study

Open the PDF for in another window

Topics: Fracture (Materials) , Pipe bends , Pipes , Waves , Inspection , Simulation

A Numerical Study on CMOD Compliance for Single-Edge Notched Bending Specimens

Enyang Wang, Wenxing Zhou, Guowu Shen, Daming Duan

J. Pressure Vessel Technol. April 2016, 138(2): 021204. doi: https://doi.org/10.1115/1.4031546

Abstract

View articletitled, A Numerical Study on CMOD Compliance for Single-Edge Notched Bending Specimens

Open the PDF for in another window

Topics: Errors , Finite element model , Fracture (Materials) , Plane strain , Stress , Three-dimensional models , ASTM International , Finite element analysis

Measurements of the Stack Metal Temperature During a Natural Gas Blowdown Event Through a Full-Bore Blowdown Valve

C. Hartloper, K. K. Botros, J. de Vries

J. Pressure Vessel Technol. April 2016, 138(2): 021205. doi: https://doi.org/10.1115/1.4031722

Abstract

View articletitled, Measurements of the Stack Metal Temperature During a Natural Gas Blowdown Event Through a Full-Bore Blowdown Valve

Open the PDF for in another window

Topics: Temperature , Valves , Flow (Dynamics) , Natural gas , Pressure , Metals , Wall temperature

Fluid-Structure Interaction

A Cell-Based Smoothed Radial Point Interpolation—Perfectly Matched Layer Method For Two-Dimensional Acoustic Radiation Problems

Lingyun Yao, Yunwu Li, Li Li

J. Pressure Vessel Technol. April 2016, 138(2): 021301. doi: https://doi.org/10.1115/1.4031720

Abstract

View articletitled, A Cell-Based Smoothed Radial Point Interpolation—Perfectly Matched Layer Method For Two-Dimensional Acoustic Radiation Problems

Open the PDF for in another window

Topics: Acoustics , Finite element methods , Pressure , Radiation (Physics) , Finite element model , Errors , Frequency response

Materials and Fabrication

Prediction of Weld Residual Stress in a Pressurized Water Reactor Pressurizer Surge Nozzle

Akira Maekawa, Atsushi Kawahara, Hisashi Serizawa, Hidekazu Murakawa

J. Pressure Vessel Technol. April 2016, 138(2): 021401. doi: https://doi.org/10.1115/1.4031376

Abstract

View articletitled, Prediction of Weld Residual Stress in a Pressurized Water Reactor Pressurizer Surge Nozzle

Open the PDF for in another window

Topics: Heat , Stress , Stress analysis (Engineering) , Welding , Pressurized water reactors , Nozzles , Simulation , Metals , Surges , Computation

Residual Stress Reduction in Single Pass Welds Using Parallel Line Reheating

Junqiang Wang, Jianmin Han, Joseph P. Domblesky, Weijing Li, Zhiyong Yang, Yingxin Zhao

J. Pressure Vessel Technol. April 2016, 138(2): 021402. doi: https://doi.org/10.1115/1.4031548

Abstract

View articletitled, Residual Stress Reduction in Single Pass Welds Using Parallel Line Reheating

Open the PDF for in another window

Topics: Stress , Welding , Heat , Temperature , Heating , Welded joints

Mathematical Approaching and Experimental Assembly to Evaluate the Risks of In-Service Welding in Hot Tapping

Ivo Andrei de O. L Lima, Alex Alisson Bandeira Santos

J. Pressure Vessel Technol. April 2016, 138(2): 021403. doi: https://doi.org/10.1115/1.4031506

Abstract

View articletitled, Mathematical Approaching and Experimental Assembly to Evaluate the Risks of In-Service Welding in Hot Tapping

Open the PDF for in another window

Topics: Computer simulation , Heat , Temperature , Welding , Manufacturing

Application of Weibull Stress Criterion to Brittle Fracture Assessment of Heat-Affected Zone-Notched Welds With Residual Stress

Yusuke Seko, Yasuhito Imai, Masaki Mitsuya, Noritake Oguchi, Fumiyoshi Minami

J. Pressure Vessel Technol. April 2016, 138(2): 021404. doi: https://doi.org/10.1115/1.4031662

Abstract

View articletitled, Application of Weibull Stress Criterion to Brittle Fracture Assessment of Heat-Affected Zone-Notched Welds With Residual Stress

Open the PDF for in another window

Topics: Fracture (Materials) , Stress , Welded joints , Fracture (Process) , Shapes , Finite element analysis , Welding , Geometry , Brittle fracture

Effect of Reeling on Sour Service Fatigue Crack Growth Behavior of Welded API5LX65 Line Pipe

Ramgopal Thodla, J. R. Gordon, Feng Gui

J. Pressure Vessel Technol. April 2016, 138(2): 021405. doi: https://doi.org/10.1115/1.4031165

Abstract

View articletitled, Effect of Reeling on Sour Service Fatigue Crack Growth Behavior of Welded API5LX65 Line Pipe

Open the PDF for in another window

Topics: Fatigue cracks , Fracture (Materials) , Hydrogen , Pipes , Fatigue

Failure Behavior of Multiple-Axial Part-Through-Wall Flaws in Alloy 690TT Steam Generator Tubes

Ki Hyeon Eom, Jin Weon Kim, Yun Jae Kim, Jong Sung Kim

J. Pressure Vessel Technol. April 2016, 138(2): 021406. doi: https://doi.org/10.1115/1.4031663

Abstract

View articletitled, Failure Behavior of Multiple-Axial Part-Through-Wall Flaws in Alloy 690TT Steam Generator Tubes

Open the PDF for in another window

Topics: Failure , Pressure , Failure mechanisms

Effect of High-Temperature Corrosion on the Service Life of P91 Piping in Biomass Co-firing

C. P. O'Hagan, R. A. Barrett, S. B. Leen, R. F. D. Monaghan

J. Pressure Vessel Technol. April 2016, 138(2): 021407. doi: https://doi.org/10.1115/1.4032648

Abstract

View articletitled, Effect of High-Temperature Corrosion on the Service Life of P91 Piping in Biomass Co-firing

Open the PDF for in another window

Topics: Corrosion , Creep , Stress , Damage , Biomass , Co-firing

Operations, Applications and Components

Effect of Nozzle Junction and Equipment Stiffness on Absorption of Pipe Thermal Loads

Kedar A. Damle, Pratik S. Gharat, Rudolf Neufeld, Wilhelm Peters

J. Pressure Vessel Technol. April 2016, 138(2): 021601. doi: https://doi.org/10.1115/1.4031719

Abstract

View articletitled, Effect of Nozzle Junction and Equipment Stiffness on Absorption of Pipe Thermal Loads

Open the PDF for in another window

Topics: Nozzles , Pipes , Stiffness , Stress , Vessels , Temperature , Design

Seismic Engineering

Ultimate Strength of a Thin Wall Elbow for Sodium Cooled Fast Reactors Under Seismic Loads

Tomoyoshi Watakabe, Kazuyuki Tsukimori, Seiji Kitamura, Masaki Morishita

J. Pressure Vessel Technol. April 2016, 138(2): 021801. doi: https://doi.org/10.1115/1.4031721

Abstract

View articletitled, Ultimate Strength of a Thin Wall Elbow for Sodium Cooled Fast Reactors Under Seismic Loads

Open the PDF for in another window

Topics: Design , Failure , Failure mechanisms , Fatigue , Pipes , Stress , Tensile strength , Thin wall structures , Fast neutron reactors , Sodium

Technical Brief

Strength of 316FR Joints Welded by Type 316FR/16-8-2 Filler Metals

Takuya Yamashita, Yuji Nagae, Kenichiro Satoh, Kenji Yamamoto

J. Pressure Vessel Technol. April 2016, 138(2): 024501. doi: https://doi.org/10.1115/1.4031444

Abstract

View articletitled, Strength of 316FR Joints Welded by Type 316FR/16-8-2 Filler Metals

Open the PDF for in another window

Topics: Creep , Filler metals , Welded joints , Welding , Tensile strength , Ferrites (Magnetic materials) , Metals , Base metals , Gas tungsten arc welding

Expert View

Recharacterization of Subsurface Flaw to Surface Flaw Based on Equivalent Fatigue Crack Growth Rate

Valery Lacroix, Yinsheng Li, Bohumir Strnadel, Kunio Hasegawa

J. Pressure Vessel Technol. April 2016, 138(2): 024701. doi: https://doi.org/10.1115/1.4031723

Abstract

View articletitled, Recharacterization of Subsurface Flaw to Surface Flaw Based on Equivalent Fatigue Crack Growth Rate

Open the PDF for in another window

Topics: Fatigue cracks , Stress , Fitness-for-service , Fracture (Materials)

All Issues

Email alerts

Accepted Manuscript Alert

New Issue Alert

RSS Feeds

Open Issues RSS Feed

Latest
Most Read
Most Cited

Development of Local Ductile Failure Assessment Method And Its Application To Four Alloys Part II : Incorporation of The Effect of Lode Angle

J. Pressure Vessel Technol

Fracture analysis of sharp notches under Mode III loading - A local approach

J. Pressure Vessel Technol

Determination and Sensitivity Analysis of Target Flaw Sizes for Performance Demonstration of Cast Austenitic Stainless Steel Pipe by Probabilistic Fracture Mechanics

J. Pressure Vessel Technol

Development of Local Ductile Failure Assessment Method and Its Application to Four Alloys Part I : Stress-Strain Relation And Analysis Without The Effect of Lode Angle

J. Pressure Vessel Technol

Failure Analysis of a Waste Heat Boiler of a Sulfurburning Sulfuric Acid Plant

J. Pressure Vessel Technol

Research Papers

Design and Analysis

Measurement and Characterization of the Initial Geometric Imperfections in High Strength U-ing, O-ing and Expanding Manufactured Steel Pipes

Minimum Weight Design for Toroidal Shells With Strengthening Component

Effect of Pipe Bend Configuration on Guided Waves-Based Defects Detection: An Experimental Study

A Numerical Study on CMOD Compliance for Single-Edge Notched Bending Specimens

Measurements of the Stack Metal Temperature During a Natural Gas Blowdown Event Through a Full-Bore Blowdown Valve

Fluid-Structure Interaction

A Cell-Based Smoothed Radial Point Interpolation—Perfectly Matched Layer Method For Two-Dimensional Acoustic Radiation Problems

Materials and Fabrication

Prediction of Weld Residual Stress in a Pressurized Water Reactor Pressurizer Surge Nozzle

Residual Stress Reduction in Single Pass Welds Using Parallel Line Reheating

Mathematical Approaching and Experimental Assembly to Evaluate the Risks of In-Service Welding in Hot Tapping

Application of Weibull Stress Criterion to Brittle Fracture Assessment of Heat-Affected Zone-Notched Welds With Residual Stress

Effect of Reeling on Sour Service Fatigue Crack Growth Behavior of Welded API5LX65 Line Pipe

Failure Behavior of Multiple-Axial Part-Through-Wall Flaws in Alloy 690TT Steam Generator Tubes

Effect of High-Temperature Corrosion on the Service Life of P91 Piping in Biomass Co-firing

Operations, Applications and Components

Effect of Nozzle Junction and Equipment Stiffness on Absorption of Pipe Thermal Loads

Seismic Engineering

Ultimate Strength of a Thin Wall Elbow for Sodium Cooled Fast Reactors Under Seismic Loads

Technical Brief

Strength of 316FR Joints Welded by Type 316FR/16-8-2 Filler Metals

Expert View

Recharacterization of Subsurface Flaw to Surface Flaw Based on Equivalent Fatigue Crack Growth Rate

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Research Papers

Design and Analysis

Fluid-Structure Interaction

Materials and Fabrication

Operations, Applications and Components

Seismic Engineering

Technical Brief

Expert View

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only