... at the notch root of the V-notched specimen. multiple dynamic loading explosive detonation toughness fatigue crack growth tensile strength prestrain 3.5% Ni steel A detonation chamber is being used for safe and efficient disposal of useless chemical weapons. Kobe Steel, Ltd. (KSL), the only...

... or Equal to 454 °C (850 °F) Section VIII, Division 22,” American Society of Mechanical Engineers. 01 05 2009 07 12 2010 19 01 2012 19 01 2012 alloys creep design engineering fatigue testing internal stresses pressure vessels tensile strength A number of alloys...

...) with the effect of thickness and C eq (International Institute of Welding Carbon equivalent formula: see page 3) requirements on the final compromise between properties and heat treatments. In particular, toughness and ultimate tensile strength (UTS) are the critical parameters that will limit the acceptance...

..., showing that the difference between the two solutions is negligible as the ratio of crack length to the plate width is less than 0.25. However, the difference may become significant when the ratio approaches one. bending cracks elastoplasticity finite element analysis plates (structures) tensile...

... finite element analysis heat exchangers internal stresses pipes rollers (machinery) stress corrosion cracking tensile strength walls 07 05 2010 11 12 2010 20 07 2011 20 07 2011 2011 American Society of Mechanical Engineers ...

... strain-rate history. 10 09 2010 09 11 2010 03 06 2011 03 06 2011 aluminium alloys loading plasticity stress-strain relations tensile strength Most external loads, which include mechanical impact, shock, and seismic loading, are transient in nature. Structures...

... 17 09 2009 14 07 2010 04 04 2011 04 04 2011 ductile fracture fracture toughness pipelines plasticity steel tensile strength welding The reel-lay method illustrated in Fig. 1 is a cost efficient alternative to the S-lay and J-lay methods ( 1 ) for installation...

... rate and the temperature, including the temperature rise during dynamic loading. The tensile strength and the yield stress of the undermatched joints increase with the strain rate and with the decreasing temperature. The strength of the undermatched zone approaches that of the base metal when...

... fission reactor materials fracture toughness testing internal stresses nuclear power stations pipes shrinkage stainless steel tensile testing welding welds fracture toughness leak-before-break narrow gap weld nuclear piping tensile strength welding residual stress Recently...

.... , 1967 , Engineering Considerations of Stress, Strain, and Strength , McGraw-Hill , New York . 17 05 2009 18 01 2010 23 02 2011 23 02 2011 clamps compressive strength elastic constants elasticity elongation fasteners plasticity tensile strength work hardening...

... using the theory of elasticity. bolted joint nonlinear deformation clamp load separating load bolt tension joint stiffness clamps elastic deformation fasteners finite element analysis plates (structures) tensile strength 14 07 2008 05 12 2008 09 02 2011 09...

.... Multiple tests were completed, and the results were highly repeatable. Note the recovery of some of the tensile strength. For A723 steel the 0.1% offset yield strength of the specimen that did not receive any thermal treatment was 1094 MPa while the one that was thermally soaked was 1137 MPa, which...

... fracture toughness glass fibre reinforced composites pipes structural engineering tensile strength tensile testing fiber-reinforced polymer pipe fiber material basalt fiber leakage burst testing Favorable properties such as high corrosion resistance and strength-to-weight ratio make...

... of cylindrical shells under different pulse duration loading conditions. In 1980, Baker et al. ( 31 ) (see also Hampton and Bitner ( 27 )) gave the following relationship for the dynamic ultimate tensile strength as a function of strain rate of all carbon steels: 4 ( σ u ) d = σ u...

... as a method to eliminate boundary condition combinations leading to premature failure. The eliminated conditions could be determined based on yield strength, deformation mode, or allowable strain. Simple modifications could allow inclusion of additional criteria (e.g., tensile strength and compressive...

... crystal microstructure finite element analysis impact (mechanical) internal stresses stainless steel stress corrosion cracking surface hardening tensile strength ultrasonic applications welding welds X-ray diffraction The presence of high tensile weld residual stress is an important...

.... The results are interpreted in the context of designing better welding consumables. 29 10 2007 06 08 2008 15 05 2009 arc welding compressive strength internal stresses martensitic steel plates (structures) tensile strength welds bainite martensite neutron diffraction...

... with the viscoplasticity theory based on overstress. A systematic procedure for determining model parameters is presented and the model is employed to predict the response of the material under various test histories. deformation polymers stress relaxation stress-strain relations tensile strength viscoplasticity...

... , American Society of Mechanical Engineers , New York , MD-Vol. 26 , pp. 65 – 83 . 05 10 2006 25 04 2007 30 12 2008 ageing alloys cracks creep fracture fatigue fission reactors hardness structural engineering tensile strength Alloy 617 is identified as one...

... plastic deformation pressure vessels shafts shear strength stress-strain relations tensile strength thin wall structures torsion 27 02 2007 18 07 2007 11 12 2008 2009 American Society of Mechanical Engineers ...