The reliable prediction and diagnosis of abnormal events provide much needed guidance for risk management. The traditional Bayesian network (traditional BN) has been used to dynamically predict and diagnose abnormal events. However, its inherent limitation caused by discrete categorization of random variables degrades the assessment reliability. This paper applied a continuous Bayesian network (CBN)-based model to reduce the above-mentioned limitation. To compute complex posterior distributions of CBN, the Markov chain Monte Carlo method (MCMC) was used. A case study was conducted to demonstrate the application of CBN, based on which a comparative analysis of the traditional BN and CBN was presented. This work highlights that the use of CBN can overcome the drawbacks of traditional BN to make dynamic prediction and diagnosis analysis more reliable.
Skip Nav Destination
Article navigation
December 2017
Research-Article
Predictive Abnormal Events Analysis Using Continuous Bayesian Network
Guozheng Song,
Guozheng Song
Centre for Risk,
Integrity and Safety Engineering (C-RISE),
Faculty of Engineering and Applied Science,
Memorial University of Newfoundland,
St. John's, NL A1B 3X5, Canada
Integrity and Safety Engineering (C-RISE),
Faculty of Engineering and Applied Science,
Memorial University of Newfoundland,
St. John's, NL A1B 3X5, Canada
Search for other works by this author on:
Faisal Khan,
Faisal Khan
Centre for Risk,
Integrity and Safety Engineering (C-RISE),
Faculty of Engineering and Applied Science,
Memorial University of Newfoundland,
St. John's, NL A1B 3X5, Canada
e-mail: fikhan@mun.ca
Integrity and Safety Engineering (C-RISE),
Faculty of Engineering and Applied Science,
Memorial University of Newfoundland,
St. John's, NL A1B 3X5, Canada
e-mail: fikhan@mun.ca
Search for other works by this author on:
Ming Yang,
Ming Yang
Centre for Risk,
Integrity and Safety Engineering (C-RISE),
Faculty of Engineering and Applied Science,
Memorial University of Newfoundland,
St. John's, NL A1B 3X5, Canada
Integrity and Safety Engineering (C-RISE),
Faculty of Engineering and Applied Science,
Memorial University of Newfoundland,
St. John's, NL A1B 3X5, Canada
Search for other works by this author on:
Hangzhou Wang
Hangzhou Wang
Centre for Risk,
Integrity and Safety Engineering (C-RISE),
Faculty of Engineering and Applied Science,
Memorial University of Newfoundland,
St. John's, NL A1B 3X5, Canada
Integrity and Safety Engineering (C-RISE),
Faculty of Engineering and Applied Science,
Memorial University of Newfoundland,
St. John's, NL A1B 3X5, Canada
Search for other works by this author on:
Guozheng Song
Centre for Risk,
Integrity and Safety Engineering (C-RISE),
Faculty of Engineering and Applied Science,
Memorial University of Newfoundland,
St. John's, NL A1B 3X5, Canada
Integrity and Safety Engineering (C-RISE),
Faculty of Engineering and Applied Science,
Memorial University of Newfoundland,
St. John's, NL A1B 3X5, Canada
Faisal Khan
Centre for Risk,
Integrity and Safety Engineering (C-RISE),
Faculty of Engineering and Applied Science,
Memorial University of Newfoundland,
St. John's, NL A1B 3X5, Canada
e-mail: fikhan@mun.ca
Integrity and Safety Engineering (C-RISE),
Faculty of Engineering and Applied Science,
Memorial University of Newfoundland,
St. John's, NL A1B 3X5, Canada
e-mail: fikhan@mun.ca
Ming Yang
Centre for Risk,
Integrity and Safety Engineering (C-RISE),
Faculty of Engineering and Applied Science,
Memorial University of Newfoundland,
St. John's, NL A1B 3X5, Canada
Integrity and Safety Engineering (C-RISE),
Faculty of Engineering and Applied Science,
Memorial University of Newfoundland,
St. John's, NL A1B 3X5, Canada
Hangzhou Wang
Centre for Risk,
Integrity and Safety Engineering (C-RISE),
Faculty of Engineering and Applied Science,
Memorial University of Newfoundland,
St. John's, NL A1B 3X5, Canada
Integrity and Safety Engineering (C-RISE),
Faculty of Engineering and Applied Science,
Memorial University of Newfoundland,
St. John's, NL A1B 3X5, Canada
1Corresponding author.
Manuscript received May 10, 2016; final manuscript received September 19, 2016; published online June 13, 2017. Assoc. Editor: Siu-Kui Au.
ASME J. Risk Uncertainty Part B. Dec 2017, 3(4): 041004 (7 pages)
Published Online: June 13, 2017
Article history
Received:
May 10, 2016
Revised:
September 19, 2016
Citation
Song, G., Khan, F., Yang, M., and Wang, H. (June 13, 2017). "Predictive Abnormal Events Analysis Using Continuous Bayesian Network." ASME. ASME J. Risk Uncertainty Part B. December 2017; 3(4): 041004. https://doi.org/10.1115/1.4035438
Download citation file:
Get Email Alerts
Cited By
Daily Engine Performance Trending Using Common Flight Regime Identification
ASME J. Risk Uncertainty Part B (March 2025)
On the Consistent Classification and Treatment of Uncertainties in Structural Health Monitoring Applications
ASME J. Risk Uncertainty Part B (March 2025)
Special Section on Uncertainty-Aware Diagnostics and Prognostics for Health Monitoring and Risk Management of Engineered Systems
ASME J. Risk Uncertainty Part B (March 2025)
On the efficacy of sparse representation approaches for determining nonlinear structural system equations of motion
ASME J. Risk Uncertainty Part B
Related Articles
Stochastic Modeling in Multibody Dynamics: Aerodynamic Loads on Ground Vehicles
J. Comput. Nonlinear Dynam (July,2010)
Probabilistic Assessment of Structures using Monte Carlo Simulations
Appl. Mech. Rev (March,2002)
Seismic Reliability Assessment of a Concrete Water Tank Based on the
Bayesian Updating of the Finite Element Model
ASME J. Risk Uncertainty Part B (June,2017)
A Bayesian Approach to Reliability-Based Optimization With Incomplete Information
J. Mech. Des (July,2006)
Articles from Part A: Civil Engineering
Risk Assessment Method for the Safe Operation of Long-Distance Pipeline Stations in High-Consequence Areas Based on Fault Tree Construction: Case Study of China–Myanmar Natural Gas Pipeline Branch Station
ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering (March,2023)
Risk Assessment for Stream Modification Projects in Urban Settings
ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering (June,2015)
Uncertainty Quantification of Power Spectrum and Spectral Moments Estimates Subject to Missing Data
ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering (December,2017)
Multilevel Decomposition Framework for Reliability Assessment of Assembled Stochastic Linear Structural Systems
ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering (March,2021)
Related Proceedings Papers
Related Chapters
Constrained Noninformative Priors with Uncertain Constraints: A Hierarchical Simulation Approach (PSAM-0437)
Proceedings of the Eighth International Conference on Probabilistic Safety Assessment & Management (PSAM)
An Algorithm for the Quantification of Hybrid Causal Logic Models (PSAM-0339)
Proceedings of the Eighth International Conference on Probabilistic Safety Assessment & Management (PSAM)
PSA Level 2 — NPP Ringhals 2 (PSAM-0156)
Proceedings of the Eighth International Conference on Probabilistic Safety Assessment & Management (PSAM)