Thermal Integral Micro-Generation (TIMGen) systems on the scale of a few Watts are proposed for use with solar or fuel-derived heat. The optics, the thermal receiver, and several alternative generation technologies, including MEMS heat engines (Stirling and Brayton cycles), thermal photovoltaics, and thermoelectric, are discussed. Analysis of system performance shows the potential for efficiency comparable to photovoltaic cells and large-scale thermal plants. A major advantage of thermal systems over PV cells is the possibility of hybrid operation, both with sunlight and with another heat source when sunlight is not available. The alternative heat source can be another renewable or conventional fossil fuel. TIMGen plants compared to large-scale centralized thermal plants offer the advantages of modularity, scalability, redundancy and low cost via mass production. They can prove to be a very attractive option both for remote, self-contained electricity generation, and as an alternative to large-scale centralized plants.
Skip Nav Destination
Article navigation
Technical Papers
Thermal Integral Micro-Generation Systems for Solar and Conventional Use
Abraham Kribus
Abraham Kribus
Environmental Sciences and Energy Research Department, Weizmann Institute of Science, Rehovot 76100, Israel
Search for other works by this author on:
Abraham Kribus
Environmental Sciences and Energy Research Department, Weizmann Institute of Science, Rehovot 76100, Israel
Contributed by the Solar Energy Division of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS for publication in the ASME JOURNAL OF SOLAR ENERGY ENGINEERING. Manuscript received by the ASME Solar Energy Division, October 2000; final revision, November 2001. Associate Editor: T. Mancini.
J. Sol. Energy Eng. May 2002, 124(2): 189-197 (9 pages)
Published Online: April 24, 2002
Article history
Received:
October 1, 2000
Revised:
November 1, 2001
Online:
April 24, 2002
Citation
Kribus, A. (April 24, 2002). "Thermal Integral Micro-Generation Systems for Solar and Conventional Use ." ASME. J. Sol. Energy Eng. May 2002; 124(2): 189–197. https://doi.org/10.1115/1.1464879
Download citation file:
Get Email Alerts
Mass Flow Control Strategy for Maximum Energy Extraction in Thermal Energy Storage Tanks
J. Sol. Energy Eng (December 2025)
Exergy Optimization of a Hybrid Multi-Evaporative Desalination Plant Powered by Solar and Geothermal Energy
J. Sol. Energy Eng (June 2025)
Correlation for Maximum Heat Transfer Between Fluidized Bed and Its Wall and Application to Solar Power Plants
J. Sol. Energy Eng (June 2025)
Related Articles
Electricity Generation From a Compound Parabolic Concentrator Coupled to a Thermoelectric Module
J. Sol. Energy Eng (August,2010)
Performance Study of a Bi-Directional Thermodiode Designed for Energy-Efficient Buildings
J. Sol. Energy Eng (August,2002)
Dish-Stirling Systems: An Overview of Development and Status
J. Sol. Energy Eng (May,2003)
Analysis and Design of Two Stretched-Membrane Parabolic Dish Concentrators
J. Sol. Energy Eng (August,1991)
Related Proceedings Papers
Related Chapters
Physiology of Human Power Generation
Design of Human Powered Vehicles
Combined Cycle Power Plant
Energy and Power Generation Handbook: Established and Emerging Technologies
The Stirling Engine
Air Engines: The History, Science, and Reality of the Perfect Engine