The correct selection of the operating wavelength is essential for a precise pyrometric temperature measurement on solar irradiated samples, as the measurement may be disturbed by reflected solar radiation. Atmospheric conditions and particularly the material emissivity have an impact on these measurements. As an approach to solve this problem, we developed a new system that uses the UV-B wavelength range for pyrometry. Simulations and measurements on blackbodies and on real hot bodies heated in the DLR Solar Furnace specified the final measurement wavelength to be in the range of 280–292 nm. A sensitive monochromator system for this UV-B pyrometry was developed and experimentally tested. Measurements in the range of 1320-1500°C on a blackbody without solar irradiation and measurements from 1500°C to about 2400°C on a real solar heated sample are presented and discussed. Final calibration was performed by using blackbody radiation of 1500°C. Two calculation methods are compared. The influence of the calibration temperature on the quality of the measurement is shown. In this first approach, the resolution of the system turned out to be in the order of magnitude of 1 K and the accuracy in the order of magnitude of 10 K.

Issue Section:
Technical Papers
Keywords:
solar energy concentrators, solar heating, furnaces, temperature measurement, pyrometers, High Temperatures, Pyrometry, UV-B, Calibration, Solar Blind, Double Monochromator
Topics:
Calibration, Emissivity, Furnaces, Radiation (Physics), Solar energy, Temperature, Temperature measurement, Ultraviolet radiation, Wavelength, High temperature, Solar radiation, Signals
1.
Neumann
,
A.
, and
Groer
,
U.
,
1996
, “
Experimenting with Concentrated Sunlight Using the Solar Furnace
,”
Sol. Energy
,
58
, pp.
181
–
190
.
2.
Harrison, T. R., 1960, Radiation Pyrometry and its Underlying Principles of Radiant Heat Transfer, John Wiley & Sons, Inc., New York.
3.
De Witt, D. P., and Nutter, G. D., 1988, Theory and Practice of Radiation Thermometry, John Wiley & Sons, Inc., New York.
4.
Tschudi, H.-R., and Mu¨ller, Ch., 2000, “Pyrometric Temperature Measurements in the Solar Furnace,” 10th SolarPACES Int. Symp. on Solar Thermal Conc. Technologies: Solar Thermal 2000, Sydney, Australia, 1, pp. 269–273.
5.
Tschudi
,
H. R.
, and
Morian
,
G.
,
2001
, “
Pyrometric Temperature Measurements in Solar Furnaces
,”
ASME J. Sol. Energy Eng.
,
123
, pp.
164
–
170
.
6.
Kneizys, F. X., Shettle, E. P., and Abreu, L. W., 1988, “User Guide to LOWTRAN 7,” Air Force Geophysics Laboratory, AFGL-TR-88-0177 Environmental Research Papers, No. 1010.
7.
Neuer, G., Pohlmann, P., and Schreiber, E., 1998, “Gesamtemissionsgrad und spektraler Emissionsgrad von Hochtemperaturmaterialien” (in German), IKE 5-249.
8.
Lide, D. R., 1995, Handbook of Chemistry and Physics 1913–1995, 75th Edition, CRC Press, London, Tokyo.
9.
Oriel Instruments, 1999, The Book of Photon Tools, L.O.T. Oriel GmbH & Co. KG.
Copyright © 2003
 by ASME
You do not currently have access to this content.