Cooling of commercial buildings contributes significantly to the peak demand placed on an electrical utility grid. Time-of-use electricity rates encourage shifting of electrical loads to off-peak periods at night and on weekends. Buildings can respond to these pricing signals by shifting cooling-related thermal loads either by precooling the building’s massive structure or by using active thermal energy storage systems such as ice storage. While these two thermal batteries have been engaged separately in the past, this paper investigates the merits of harnessing both storage media concurrently in the context of optimal control for a range of selected parameters. A parametric analysis was conducted utilizing an EnergyPlus-based simulation environment to assess the effects of building mass, electrical utility rates, season and location, economizer operation, central plant size, and thermal comfort. The findings reveal that the cooling-related on-peak electrical demand and utility cost of commercial buildings can be substantially reduced by harnessing both thermal storage inventories using optimal control for a wide range of conditions.
Skip Nav Destination
Article navigation
February 2005
Technical Papers
Parametric Analysis of Active and Passive Building Thermal Storage Utilization*
Guo Zhou,
Guo Zhou
University of Colorado at Boulder, Civil, Environmental, and Architectural Engineering, Boulder, Colorado 80309-0428
Search for other works by this author on:
Moncef Krarti,
Moncef Krarti
University of Colorado at Boulder, Civil, Environmental, and Architectural Engineering, Boulder, Colorado 80309-0428
Search for other works by this author on:
Gregor P. Henze
Gregor P. Henze
University of Nebraska-Lincoln, Architectural Engineering, Omaha, Nebraska 68182-0681
Search for other works by this author on:
Guo Zhou
University of Colorado at Boulder, Civil, Environmental, and Architectural Engineering, Boulder, Colorado 80309-0428
Moncef Krarti
University of Colorado at Boulder, Civil, Environmental, and Architectural Engineering, Boulder, Colorado 80309-0428
Gregor P. Henze
University of Nebraska-Lincoln, Architectural Engineering, Omaha, Nebraska 68182-0681
Contributed by the Solar Energy Division and presented at the ISEC2004 Portland, Oregon, July 1–14, 2004 of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS. Manuscript received by the ASME Solar Division April 27, 2004, final revision April 29, 2004. Associate Editor: J. Davidson.
J. Sol. Energy Eng. Feb 2005, 127(1): 37-46 (10 pages)
Published Online: February 7, 2005
Article history
Received:
April 27, 2004
Revised:
April 29, 2004
Online:
February 7, 2005
Citation
Zhou , G., Krarti, M., and Henze, G. P. (February 7, 2005). "Parametric Analysis of Active and Passive Building Thermal Storage Utilization." ASME. J. Sol. Energy Eng. February 2005; 127(1): 37–46. https://doi.org/10.1115/1.1824110
Download citation file:
Get Email Alerts
A Nonintrusive Optical Approach to Characterize Heliostats in Utility-Scale Power Tower Plants: Camera Position Sensitivity Analysis
J. Sol. Energy Eng (December 2024)
A Solar Air Receiver With Porous Ceramic Structures for Process Heat at Above 1000 °C—Heat Transfer Analysis
J. Sol. Energy Eng (April 2025)
View Factors Approach for Bifacial Photovoltaic Array Modeling: Bifacial Gain Sensitivity Analysis
J. Sol. Energy Eng (April 2025)
Resources, Training, and Education Under the Heliostat Consortium: Industry Gap Analysis and Building a Resource Database
J. Sol. Energy Eng (December 2024)
Related Articles
Energy and Cost Minimal Control of Active and Passive Building Thermal Storage Inventory
J. Sol. Energy Eng (August,2005)
Evaluation of Reinforcement Learning for Optimal Control of Building Active and Passive Thermal Storage Inventory
J. Sol. Energy Eng (May,2007)
Sensitivity Analysis of Optimal Building Thermal Mass Control
J. Sol. Energy Eng (November,2007)
Advances in Near-Optimal Control of Passive Building Thermal Storage
J. Sol. Energy Eng (May,2010)
Related Proceedings Papers
Related Chapters
Modeling and Optimal Control for Batch Cooling Crystallization
International Conference on Advanced Computer Theory and Engineering, 4th (ICACTE 2011)
Feedback-Aided Minimum Joint Motion
Robot Manipulator Redundancy Resolution
QP Based Encoder Feedback Control
Robot Manipulator Redundancy Resolution