Wind energy predictions for many rural, complex terrain regions are based solely on large-scale meteorological models that may poorly characterize the local resource. Changes in government policies, energy economics, and wind technologies suggest that the best wind resources across such a complex terrain region in southeast Ohio may be economically viable. The wind energy and assessment visualization (WEAV) assessment approach is a meso-scale strategy to locate the best resource in a marginal wind region. The measurement component is described here. Wind characteristics measurements on a communications tower at six heights up to 240 m, are being acquired. This data will be input into a complex-terrain wind simulator with terrain information to model the wind resource across approximately 2000 square miles (5200 km2). Advantages of the WEAV assessment strategy include explicit measurement of wind shear and velocities, long-term characterization of the free stream velocity field, and evaluation of a much larger assessment region. Included is a description of, the motivation for and advantages of this approach, details of the design, installation, and challenges of an extra-tall tower wind measurements, and a discussion of the economics of both Class 2 wind (∼250 W/m2) and the WEAV assessment approach compared with conventional wind assessments.
Issue Section:
Design Innovation
References
1.
Landberg
, L.
, Myllerup
, L.
, Rathmann
, O.
, Lundtang Petersen
, E.
, Hoffmann Jørgensen
, B.
, Badger
, J.
, and Gylling Mortensen
, N.
, 2003, “Review Article: Wind Resource Estimation—An Overview,”
Wind Energy
, 6
, pp. 261
–271
.2.
Hughes
, T.
, 2002, “OWPI’s Wind Assessment for Oklahoma,”
Oklahoma Wind Power Initiative.
http://www.seic.okstate.edu/owpi_old/about/library/wind%20resource%20assessment%20for%20Oklahoma.pdfhttp://www.seic.okstate.edu/owpi_old/about/library/wind%20resource%20assessment%20for%20Oklahoma.pdf.3.
An example of publicly available wind resource data is available by request from Green Energy Ohio’s website: “Completed Ohio Wind Monitoring Sites,” http://www.greenenergyohio.org/page.cfm?pageID = 120http://www.greenenergyohio.org/page.cfm?pageID = 120, accessed May 10, 2011.
4.
Kalnay
, E.
, Kanamitsu
, M.
, Kistler
, R.
, Collins
, W.
, Deaven
, D.
, Gandin
, L.
, Iredell
, M.
, Saha
, S.
, White
, G.
, Woollen
, J.
, Zhu
, Y.
, Leetmaa
, A.
, Reynolds
, R.
, Chelliah
, M.
, Ebisuzaki
, W.
, Higgins
, W.
, Janowiak
, J.
, Mo
, K. C.
, Ropelewski
, C.
, Wang
, J.
, Jenne
, R.
, and Joseph
, D.
, 1996, “The NCEP/NCAR 40-Year Reanalysis Project,”
Bull. Am. Meteorol. Soc.
, 77
(3
), pp. 437
–471
.5.
Elliott
, D.
, Holladay
, C.
, Barchet
, W.
, Foote
, H.
, and Sandusky
, W.
, 1986, “Wind Energy Resource Atlas of the United States,”
DOE/CH 10093–4, Chap. II. http://rredc.nrel.gov/wind/pubs/atlas/chp2.htmlhttp://rredc.nrel.gov/wind/pubs/atlas/chp2.html.6.
Taylor
, M.
, Mackiewicz
, P.
, Brower
, M.
, and Markus
, M.
, 2004, “An Analysis of Wind Resource Uncertainty in Energy Production Estimates,”
European Wind Energy Association
, London, United Kingdom,
http://www.2004ewec.info/files/23_1400_marktaylor_01.pdfhttp://www.2004ewec.info/files/23_1400_marktaylor_01.pdf.7.
Manwell
, J.
, Rogers
, A.
, and Lackner
, M.
, 2008, “Uncertainty Analysis in MCP-Based Wind Resource Assessment and Energy Production Estimation,”
ASME J. Sol. Energy Eng.
, 130
, p. 031006
.8.
Green Energy Ohio, “GEO/SEED Ohio 1999–2000 Wind Monitoring Test at Bowling Green Proving Commercial Potential—Utility-Scale Wind Development in Ohio,” http://www.greenenergyohio.org/page.cfm?pageID=120.
9.
AWS Truewind, “Ohio Wind Resource Explorer Wind Map,” (2004) at 50 meters. http://www.windpoweringamerica.gov/images/windmaps/oh_50m_800.jpghttp://www.windpoweringamerica.gov/images/windmaps/oh_50m_800.jpg. Additional heights previously available included 30 m, 70 m, and 100 m.
10.
AWS Truewind, 2010, LLC “Ohio—Annual Average Wind Speed at 80 m” (2010) NREL, http://www.windpoweringamerica.gov/wind_resource_maps.asp?stateab = oh.
11.
Cohen
, J.
, Schweizer
, T.
, Laxson
, A.
, Butterfield
, S.
, Schreck
, S.
, Fingersh
, L.
, Veers
, P.
, and Ashwill
, T.
, 2008, “Technology Improvement Opportunities for Low Wind Speed Turbines and Implications for Cost of Energy Reduction,”
NREL Technical Report No. NREL/TP-500-41036.12.
Four examples include: Siemens’ SWT-2.3MW-113m, Repower’s 3.2 MW 114 m with a 143 m hub height, Vestas’ V100m-1.8 MW, GE’s TC3 2.5 MW 103 m with hub heights of 100 m and others.
13.
The cost of energy for Class 2 wind is derived from the National Renewable Energy Laboratory’s report, 2008, “20% Wind Energy by 2030: Increasing Wind Energy’s Contribution to U.S. Electricity Supply,” DOE/GO-102008-2567, July 2008, p. 8.
14.
National Oceanic and Atmospheric Administration, 2009 http://www.esrl.noaa.gov/psd/cgi-bin/data/usclimatehttp://www.esrl.noaa.gov/psd/cgi-bin/data/usclimate.
15.
National Land Cover Dataset (NLCD), 2000, http://edc2.usgs.gov/pubslists/factsheets/fs10800.pdfhttp://edc2.usgs.gov/pubslists/factsheets/fs10800.pdf
16.
Gipe
, P.
, 2004, Wind Power: Renewable Energy for Home, Farm, and Business
, Chelsea Green Publishing
, VT
.17.
AWS Truewind Scientific: Bailey, B.H., McDonald, S. L., 1997, “Wind Resource Assessment Handbook: Fundamentals for Conducting a Successful Monitoring Program.” NREL Subcontract No. TAT-5-15283-01, pp.6–6. http://www.nrel.gov/wind/pdfs/22223.pdfhttp://www.nrel.gov/wind/pdfs/22223.pdf.
18.
Wind Rose is nearest to the tower as provided originally by AWS Truewind, now through the Ohio Power Siting Board, Wind Resource Map, http://maps.opsb.ohio.gov/windmap/windrose/OH1240_1680.JPGhttp://maps.opsb.ohio.gov/windmap/windrose/OH1240_1680.JPG.
19.
International Electrotechnical Commission IEC 61400-12-1, 2005, “Wind turbines—Part 12-1: Power Performance Measurement of Electricity Producing Wind Turbines,” 3rd ed., 2005-12, “Annex G: Mounting of instruments on the meteorological mast,” pp. 66–73.
20.
Hunter
, R. S.
, Pedersen
, B. M.
, Pedersen
, F.
, Klug
, H.
, van der Borg
, N.
, Kelley
, N.
, and Dahlberg
, J. Å.
, eds., 1999, “Expert Group Study on Recommended Practices for Wind Turbine Testing and Evaluation. 11: Wind Speed Measurement and Use of Cup Anemometry,”
Second print 2003, submitted to the Executive Committee of the International Energy Agency Programme for Research and Development on Wind Energy Conversion Systems.
http://www.ieawind.org/Task_11/RecommendedPract/11_Anemometry.pdfhttp://www.ieawind.org/Task_11/RecommendedPract/11_Anemometry.pdf.21.
Three face widths is recommended in
Hansen
, M.
, and Pedersen
, B.
, 1999, “Influence of the Meteorology Mast on a Cup Anemometer,”
J. Sol. Energy Eng.
, 121
(2
), pp. 128
–131
and [19].22.
Clark
, S. H.
, Clay
, O.
, Goglia
, J. A.
, Hoopes
, T. R.
, Jacobs
, L. T.
, and Smith
, R. P.
, 2009, “Investigation of the NRG #40 Anemometer Slowdown”
American Wind Energy Association (AWEA) WindPower 2009
, May 4–7, 2009, Chicago, IL.
http://www.nrgsystems.com/TechSupport/∼/media/Files/PDFs/40C%20White%20Paper_Windpower%202009_V5%2011%2009.ashxhttp://www.nrgsystems.com/TechSupport/∼/media/Files/PDFs/40C%20White%20Paper_Windpower%202009_V5%2011%2009.ashx.23.
20 gauge, rather than the specified 22, was purchased to provide cables that could support their own weight for the extreme lengths required in this extra-tall tower installation: Belden cable PN-9364 and PN-9320.
24.
Description of cable sealing methods can be found online. One such description can be found at http://www.directivesystems.com/waterproofing%20tips.htmhttp://www.directivesystems.com/waterproofing%20tips.htm, “Cable Sealing Methods,” accessed June 30, 2011.
Copyright © 2012
by American Society of Mechanical Engineers
You do not currently have access to this content.
