Abstract
Waterproof breathable valves (WBV) are applied to the battery packs in electric vehicles due to their advantages of high efficiency waterproof and air pressure balance. With the continuity of mass transfer of WBV and uncertain thermal conditions, the dynamic thermal characteristic of the moisture inside the battery pack is difficult to obtain by experiments, especially the phase change of the moisture. To analyze WBV mass transfers to the temperature–humidity characteristic in the battery pack, this study presents a temperature–humidity coupling model of the battery pack based on the mass transfer characteristic of WBV. A mass transfer model of WBV is developed with the airflow mass transfer characteristic in air pressure difference. The proposed models verified the feasibility of dynamic thermal characteristic analysis with experiments. Finally, a practical case study on a battery pack is used to analyze dynamic characteristics of the temperature–humidity during idle and working. Using the coupling model and the WBV model, temperature–humidity distribution and the location and time attributes of moisture condensation in the battery pack are effectively obtained. The inner walls of the pack casing and the battery surface near WBV are condensation areas during environmental conditions changing.
