... a tool cooling geometry, cutting speed, and cryogen flow rate as well as predicting tool life and achievable material removal rate. A detailed explanation of the analytical heat transfer model is presented, which is a modified form of Loewen and Shaw's orthogonal cutting model, where a thermal resistance...

... three-dimensional (3D) printer, has great potential for rapid prototyping of custom-designed cell culture devices for biomedical research. Contributed by the Heat Transfer Division of ASME for publication in the J OURNAL OF T HERMAL S CIENCE AND E NGINEERING A PPLICATIONS . Manuscript received...

...Chao Liang; Darshil R. Patel; Maulik R. Shelat To support an effort to setup an industrial scale production facility to produce metal substrates coated with porous boiling surface (PBS) coating to enhance boiling heat transfer performance of these metal substrates, an axisymmetric transient heat...

... these results in real industrial applications. Model design of the clamping system as well as simulation and experimental results are shown and discussed. Heat and mass transfer Heat exchangers Heat transfer Low temperature heat transfer Melting Thermal systems Manufacturing Solidification...

...Hosny Z. Abou-Ziyan; Issa F. Almesri; Mosab A. Alrahmani; Jaber H. Almutairi This paper reports the local multifaceted and area-averaged convective heat transfer coefficients (CHTCs) of longitudinal and transverse bricks arranged in lattice brick setting in tunnel kilns, using a three-dimensional...

.... Thermal boundary condition of the spindle system has been obtained using the heat transfer theory. Thermal model of the spindle system with tilting pad bearing has been built with the finite element method in order to calculate its temperature and thermal displacement distribution. Effects...

... in a regenerative furnace relates to complex heat transfer phenomena, combustion, and fluid flow [ 12 ], fluent software was used to calculate and analyze a high-efficiency, energy-saving regenerative heating furnace in a factory in this paper. The distributions of the overall flow field and temperature field...

... , H 2 O vapor, and O 2 ) distributions of each subzone were evaluated. The computational fluid dynamics (CFD) approach was employed to simulate the flow, temperature profile, and heat transfer. The realizable k– ε model was applied for turbulence simulation of the fluid flow coming from the burners...

... non-Darcy model. Results are obtained for four casting speeds varying from 40 to 100 mm/min. The metal–mold contact region, as well as the convective heat transfer coefficient at the mold wall, is also varied. In addition to the above, the Darcy number for the porous media is also changed. All...

... to the heat source. At this location, the PCM layer stores the major inlet heat flux. The time needed to release the stored heat flux is 10 h. Contributed by the Heat Transfer Division of ASME for publication in the J OURNAL OF T HERMAL S CIENCE AND E NGINEERING A PPLICATIONS . Manuscript...

.... The flow structure, heat transfer characteristics, and the pumping power have been investigated for different jet positions. The results show that the jet position affects significantly the flow structure, as well as the heat transfer characteristics. According to the results of average heat transfer...

...Nitin Kumar Lautre; Apurbba Kumar Sharma; Shantanu Das; Pradeep Kumar 1 Corresponding author. Contributed by the Heat Transfer Division of ASME for publication in the J OURNAL OF T HERMAL S CIENCE AND E NGINEERING A PPLICATIONS . Manuscript received January 9, 2015; final manuscript...

...M. R. Salem; R. K. Ali; R. Y. Sakr; K. M. Elshazly This study presents an experimental investigation of the characteristics of convective heat transfer in horizontal shell and coil heat exchangers in addition to the friction factor for fully developed flow through their helically coiled tube (HCT...

...J. Meng; S. Wong; Y. Jaluria Contributed by the Heat Transfer Division of ASME for publication in the J OURNAL OF T HERMAL S CIENCE AND E NGINEERING A PPLICATIONS . Manuscript received July 24, 2014; final manuscript received December 5, 2014; published online January 13, 2015. Assoc...

...Mainul Hasan; Latifa Begum 1 Corresponding author. Contributed by the Heat Transfer Division of ASME for publication in the J OURNAL OF T HERMAL S CIENCE AND E NGINEERING A PPLICATIONS . Manuscript received August 5, 2014; final manuscript received November 28, 2014; published online...

... to the slowdown of the jet. At Z  = 8000 mm, the temperature distribution is more uniform across the radial direction. Therefore, the heat transfer through the inner coil to the molten salt is higher in the lower part of the furnace. Parametric studies have been conducted to optimize the furnace operation...

... for many products, failure of cutting tool might lead to rejection of the workpiece rather than just the cutting tool. 1 Corresponding author. Contributed by the Heat Transfer Division of ASME for publication in the J OURNAL OF T HERMAL S CIENCE AND E NGINEERING A PPLICATIONS . Manuscript...