... its energy consumption. Therefore, in order to further improve the thermal efficiency of the heating furnace and reduce the emission of pollutants, this paper combines the actual operation of the SRT-III heating furnace in the chemical plant to establish a fluid domain model. The effects of different...

... and also it acts as an insulator which minimizes the heat losses during the nocturnal period. Energy balance numerical equations were formulated for all layers in the pond and temperature variation was determined mathematically and experimentally. The maximum thermal efficiencies of the top convective...

..., performance improvement of the LPG cook-stoves is essential. In the present work, the thermal efficiency of a traditional cook stove has been studied both experimentally and numerically for LPG fuel. Based on the knowledge from the computational model concerning flow field and species transport parameters...

... of the system thermal efficiency and the length of the cooler were performed. The effects of the inlet and outlet pressure of the expander, the heat transfer coefficient and the logarithmic mean temperature difference (LMTD) on the system thermal efficiency and the length of the cooler were investigated...

... strategies thermal efficiency electronic cooling energy efficiency heat and mass transfer thermal systems The use of metrics has been touted as an essential tool in assessing the performance of data centers to lower the consumption of power and other resources. These metrics enable data center...

...) of 4 compared to the smooth plate. It is found that in contrast to the smooth plate, ribs beneath the absorber plate effectively improves thermal and exergetic efficiency. Maximum enhancement of 36% and 17% is obtained in exergetic efficiency (η ex ) and thermal efficiency (η th ), respectively, for e...

...–air mixture, fuel flow rate, thermal load height, and loading vessel size. The maximum thermal efficiency has been found for an equivalence ratio of 1.4 for the LPG–air mixture and at load height of 20 mm. The heat flux distribution at the bottom of the vessel is found to be bimodal with the higher...

... thermal efficiency CFD HTC The brake disks (more commonly used than the drum brakes) utilize rubbing or friction surfaces to decelerate the ongoing car. The friction materials in the form of the brake pads (mounted on a device called the brake caliper) are forced mechanically, hydraulically...

...Alex Wohlgemuth; Sandip Mazumder; Dale Andreatta In many developing countries, natural gas, wood, or biomass fired cookstoves find prolific usage. Skirts, placed around the cookpot, have been proposed as a means to improve the thermal efficiency. However, use of skirts has shown conflicting results...