In this paper, the start-up process of the ring/liner system with surface texturing is studied. By employing a thermal-mixed lubrication model considering the oil supply, the tribological behavior of the textured surface under the cold and hot start-up conditions is investigated. It is found that the friction coefficient curve under the cold start-up condition is different from the hot start-up result. The textured surface is easier to form the hydrodynamic lubrication than the smooth surface, which is helpful to separate the mixed lubricated contact surfaces. With the textured features on the ring face, the less friction heat is generated at the start-up phase. These effects could prove beneficial in applications with the frequent start and stop conditions. Besides, the inlet wedge of ring can also influence the start-up performance.
Performance of Surface Texturing During Start-Up Under Starved and Mixed Lubrication
School of Mechanical Engineering,
Shanghai Jiaotong University,
Shanghai 200240, China
First Automotive Works (FAW) Group,
Changchun 130011, China
Contributed by the Tribology Division of ASME for publication in the JOURNAL OF TRIBOLOGY. Manuscript received August 23, 2015; final manuscript received February 23, 2016; published online June 23, 2016. Assoc. Editor: Jordan Liu.
- Views Icon Views
- Share Icon Share
- Search Site
Gu, C., Meng, X., Xie, Y., and Kong, X. (June 23, 2016). "Performance of Surface Texturing During Start-Up Under Starved and Mixed Lubrication." ASME. J. Tribol. January 2017; 139(1): 011702. https://doi.org/10.1115/1.4033135
Download citation file: