This technical brief studied the cavitation erosion behavior of the silicified graphite. The phase constituents, surface microstructure, and chemical compositions of silicified graphite were examined by using X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS), respectively. Cavitation experiments were carried out by using an ultrasonic vibration test system. The experimental results show that the silicified graphite exhibits an excellent cavitation erosion resistance; this can be attributed to the fact that the silicified graphite has the characteristics of both the silicon carbide and the graphite. The SEM morphology studies of the erosion surfaces indicated that the inherent brittleness of SiC ceramic material results in the formation of erosion pits on the surface of silicified graphite.
Skip Nav Destination
Article navigation
November 2017
Technical Briefs
Cavitation Erosion Resistance of Silicified Graphite by Liquid Silicon Penetration Technique
Hongqin Ding,
Hongqin Ding
School of Mechanical Engineering,
Southeast University,
2 Southeast Road, Jiangning District,
Nanjing 211189, China
Southeast University,
2 Southeast Road, Jiangning District,
Nanjing 211189, China
Search for other works by this author on:
Shuyun Jiang
Shuyun Jiang
Professor
School of Mechanical Engineering,
Southeast University,
2 Southeast Road, Jiangning District,
Nanjing 211189, China
e-mail: jiangshy@seu.edu.cn
School of Mechanical Engineering,
Southeast University,
2 Southeast Road, Jiangning District,
Nanjing 211189, China
e-mail: jiangshy@seu.edu.cn
Search for other works by this author on:
Hongqin Ding
School of Mechanical Engineering,
Southeast University,
2 Southeast Road, Jiangning District,
Nanjing 211189, China
Southeast University,
2 Southeast Road, Jiangning District,
Nanjing 211189, China
Shuyun Jiang
Professor
School of Mechanical Engineering,
Southeast University,
2 Southeast Road, Jiangning District,
Nanjing 211189, China
e-mail: jiangshy@seu.edu.cn
School of Mechanical Engineering,
Southeast University,
2 Southeast Road, Jiangning District,
Nanjing 211189, China
e-mail: jiangshy@seu.edu.cn
1Corresponding author.
Contributed by the Tribology Division of ASME for publication in the JOURNAL OF TRIBOLOGY. Manuscript received September 30, 2016; final manuscript received January 18, 2017; published online June 5, 2017. Assoc. Editor: Dae-Eun Kim.
J. Tribol. Nov 2017, 139(6): 064501 (5 pages)
Published Online: June 5, 2017
Article history
Received:
September 30, 2016
Revised:
January 18, 2017
Citation
Ding, H., and Jiang, S. (June 5, 2017). "Cavitation Erosion Resistance of Silicified Graphite by Liquid Silicon Penetration Technique." ASME. J. Tribol. November 2017; 139(6): 064501. https://doi.org/10.1115/1.4035869
Download citation file:
Get Email Alerts
Cited By
Related Articles
Characterization of Cavitation Eroded Surfaces at Different Temperatures Using Wavelet Method
J. Tribol (May,2017)
Cavitation Erosion Resistance of Sputter-Deposited Cr 3 Si Film on Stainless Steel
J. Tribol (January,2017)
Comparing the Cavitation and Slurry Erosion Wear Resistance of 16Cr-5Ni Stainless Steel with 13Cr-4Ni CA6NM Stainless Steel
J. Tribol (January,0001)
Assessment of Cavitation Erosion With a URANS Method
J. Fluids Eng (April,2014)
Related Proceedings Papers
Related Chapters
On Cavitation Aggressiveness and Cavitation Erosion on Marine Propellers using a URANS Method
Proceedings of the 10th International Symposium on Cavitation (CAV2018)
Exploration of Cavitation-Induced Erosion Metrics in Throttle Flow Simulations
Proceedings of the 10th International Symposium on Cavitation (CAV2018)
Homogeneous Cavitation Model Used to Predict Erosion
Proceedings of the 10th International Symposium on Cavitation (CAV2018)