Skip Nav Destination
Issues
October 1988
ISSN 0742-4787
EISSN 1528-8897
In this Issue
Research Papers
A Full Numerical EHL Solution for Line Contacts Under Pure Rolling Condition With a Non-Newtonian Rheological Model
J. Tribol. October 1988, 110(4): 583–586.
doi: https://doi.org/10.1115/1.3261696
Topics:
Rheology
,
Lubrication
,
Cavitation
,
Disks
,
Fluids
,
Lubricants
,
Pressure
,
Surface deformation
Static Characteristics of a Slot-Entry Gas Journal Bearing With Feeding Holes
J. Tribol. October 1988, 110(4): 587–591.
doi: https://doi.org/10.1115/1.3261697
Topics:
Journal bearings
,
Bearings
,
Gas flow
,
Clearances (Engineering)
,
Finite difference methods
,
Flow (Dynamics)
,
Inflow
,
Stiffness
,
Stress
Sliding Contact Between Dissimilar Elastic Bodies
J. Tribol. October 1988, 110(4): 592–596.
doi: https://doi.org/10.1115/1.3261698
Topics:
Elastic constants
,
Load bearing capacity
,
Stress
,
Symmetry (Physics)
Analysis of Viscous Pumps With Shrouded Rayleigh-Steps Using Compressible Fluid
J. Tribol. October 1988, 110(4): 597–601.
doi: https://doi.org/10.1115/1.3261699
The Role of Plastic Deformation in Wear of Thin Films
J. Tribol. October 1988, 110(4): 602–608.
doi: https://doi.org/10.1115/1.3261700
Topics:
Deformation
,
Thin films
,
Wear
,
Stress
,
Mechanical properties
,
Finite element analysis
,
Geometry
,
Low cycle fatigue
,
Metals
,
Tribology
Tilting Pad Thrust Bearing Tests—Influence of Pivot Location
J. Tribol. October 1988, 110(4): 609–613.
doi: https://doi.org/10.1115/1.3261701
Topics:
Thrust bearings
,
Temperature
,
Bearings
,
Design
A New Hydrodynamic Gas Bearing Concept
J. Tribol. October 1988, 110(4): 614–620.
doi: https://doi.org/10.1115/1.3261702
Topics:
Gas bearings
,
Design
,
Bearings
,
Damping
,
Bending (Stress)
,
Coulombs
,
Dampers
,
Foil bearings
,
Friction
,
Rotors
Effect of High Energy Ion Bombardment on the Tribological Properties of WS2 Sputtered Films
J. Tribol. October 1988, 110(4): 621–627.
doi: https://doi.org/10.1115/1.3261703
On the Stability and Uniqueness of Elastohydrodynamic Lubrication Solutions
J. Tribol. October 1988, 110(4): 628–631.
doi: https://doi.org/10.1115/1.3261704
Topics:
Elastohydrodynamic lubrication
,
Stability
,
Contact mechanics
On the Nature of O-Rings in Contact With Rough Surfaces
J. Tribol. October 1988, 110(4): 632–637.
doi: https://doi.org/10.1115/1.3261705
Topics:
Seals
,
Surface roughness
,
Pressure
,
Deflection
,
Elasticity
,
Plates (structures)
,
Sealing (Process)
,
Theoretical analysis
,
Wavelength
An Experimental Investigation on the Rotating Journal Surface Temperature Distribution in a Full Circular Bearing
J. Tribol. October 1988, 110(4): 638–645.
doi: https://doi.org/10.1115/1.3261706
Topics:
Bearings
,
Temperature distribution
,
Temperature
,
Lubricants
,
Stress
,
Viscosity
,
Film thickness
,
Journal bearings
,
Lubricating oils
Sliding Behavior of Alumina/Nickel and Alumina/Nickel Aluminide Couples at Room and Elevated Temperature
J. Tribol. October 1988, 110(4): 646–652.
doi: https://doi.org/10.1115/1.3261707
Topics:
Nickel
,
Temperature
,
Wear
,
Alloys
,
Disks
,
Friction
,
Damage
,
Intermetallic compounds
,
Sliding friction
Nonuniform Temperature in Non-Newtonian Compressible Fluid Film Lubrication of Rollers
J. Tribol. October 1988, 110(4): 653–658.
doi: https://doi.org/10.1115/1.3261708
Topics:
Fluid film lubrication
,
Rollers
,
Temperature
,
Pressure
,
Density
,
Fluid films
,
Fluids
,
Cavitation
,
Roller bearings
,
Theoretical analysis
Flash Temperature on the Asperity Scale and Scuffing
J. Tribol. October 1988, 110(4): 659–663.
doi: https://doi.org/10.1115/1.3261709
Topics:
Temperature
,
Polishing
,
Stress
,
Approximation
,
Coulombs
,
Finishes
,
Friction
,
Rollers
,
Simulation models
,
Surface roughness
Investigation of a Flexible Disk Rotating Near a Rigid Surface
J. Tribol. October 1988, 110(4): 664–669.
doi: https://doi.org/10.1115/1.3261710
Topics:
Disks
,
Displacement
,
Tension
,
Membranes
Evaluation of Slip-Traction Characteristics of Polymeric Transfer Films
J. Tribol. October 1988, 110(4): 670–673.
doi: https://doi.org/10.1115/1.3261711
Topics:
Traction
Axisymmetric Solution of a Flexible Disk Rotating Near a Rigid Surface
J. Tribol. October 1988, 110(4): 674–677.
doi: https://doi.org/10.1115/1.3261712
Topics:
Disks
,
Membranes
,
Rotating disks
,
Stress
,
Tension
The Friction of Some Polymers and Elastomers at High Values of Pressure X Velocity
J. Tribol. October 1988, 110(4): 678–684.
doi: https://doi.org/10.1115/1.3261713
Topics:
Elastomers
,
Friction
,
Polymers
,
Pressure
,
Temperature
Collocation Method for Finite Length Squeeze Film Dampers With Variable Clearance
J. Tribol. October 1988, 110(4): 685–692.
doi: https://doi.org/10.1115/1.3261714
Topics:
Clearances (Engineering)
,
Dampers
,
Damping
,
Stiffness
,
Bearings
,
Design
,
Dynamic analysis
,
Finite difference methods
,
Transient analysis
The Performance of Ball Bearings With Silicon Nitride Ceramic Balls in High Speed Spindles for Machine Tools
J. Tribol. October 1988, 110(4): 693–698.
doi: https://doi.org/10.1115/1.3261715
Topics:
Ball bearings
,
Machine tools
,
Silicon nitride ceramics
,
Lubrication
,
Steel
,
Temperature
,
Centrifugal force
,
Computers
,
Density
Lubrication Capacity of Gears of Circular-Arc Tooth-Profile
J. Tribol. October 1988, 110(4): 699–703.
doi: https://doi.org/10.1115/1.3261716
Topics:
Gears
,
Lubrication
,
Film thickness
,
Stress
,
Viscosity
,
Capacitance
,
Load bearing capacity
,
Lubricants
,
Calibration
,
Dimensions
The Influence of Crack Face Friction and Trapped Fluid on Surface Initiated Rolling Contact Fatigue Cracks
J. Tribol. October 1988, 110(4): 704–711.
doi: https://doi.org/10.1115/1.3261717
Topics:
Fatigue cracks
,
Fluids
,
Fracture (Materials)
,
Friction
,
Rolling contact
,
Fluid pressure
,
Shear stress
,
Stress
A Thin Film Flow Rupture Model for Newtonian and Viscoelastic Fluids
J. Tribol. October 1988, 110(4): 712–717.
doi: https://doi.org/10.1115/1.3261718
Topics:
Flow (Dynamics)
,
Rupture
,
Thin films
,
Viscoelastic fluids
,
Stress
,
Boundary-value problems
,
Fluids
,
Pressure
,
Surface tension
,
Cylinders
Gas Lubrication of a Ringless Piston in an Internal Combustion Engine Under Dynamic Loading
J. Tribol. October 1988, 110(4): 718–726.
doi: https://doi.org/10.1115/1.3261719
An Alternate Solution of the Deformation of a Cylinder Between Two Flat Plates
J. Tribol. October 1988, 110(4): 727–729.
doi: https://doi.org/10.1115/1.3261720
Topics:
Cylinders
,
Deformation
,
Flat plates
,
Pressure
,
Space
Technical Briefs
Theoretical Analysis of Pneumatic Instability of Externally Pressurized Porous Gas Journal Bearings Considering Velocity Slip
J. Tribol. October 1988, 110(4): 730–733.
doi: https://doi.org/10.1115/1.3261721
Topics:
Journal bearings
,
Theoretical analysis
,
Perturbation theory
,
Rotors
,
Stability
