Skip Nav Destination
Issues
October 2005
ISSN 0742-4787
EISSN 1528-8897
In this Issue
Research Papers
Prediction of Fretting Fatigue Behavior of Metals Using a Fracture Mechanics Approach with Special Consideration to the Contact Problem
J. Tribol. October 2005, 127(4): 685–693.
doi: https://doi.org/10.1115/1.2000265
Topics:
Contact mechanics
,
Fatigue
,
Fatigue cracks
,
Fracture mechanics
,
Stiffness
,
Stress
,
Fatigue strength
,
Pressure
,
Fracture (Materials)
,
Fatigue limit
Thermal Analysis of the Transient Temperatures Arising at the Contact Spots of Two Sliding Surfaces
J. Tribol. October 2005, 127(4): 694–704.
doi: https://doi.org/10.1115/1.2000983
Topics:
Fractals
,
Heat
,
Heat conduction
,
Temperature
,
Stress
,
Relaxation (Physics)
,
Thermal analysis
,
Dimensions
Elastic-Plastic Partial Slip Rolling Wheel-Rail Contact with an Oblique Rail Crack
J. Tribol. October 2005, 127(4): 705–712.
doi: https://doi.org/10.1115/1.2033006
Topics:
Finite element model
,
Fracture (Materials)
,
Pressure
,
Rails
,
Shear stress
,
Stress
,
Wheels
,
Friction
,
Rolling contact
,
Finite element analysis
Elastic-Plastic Finite Element Analysis of Nonsteady State Partial Slip Wheel-Rail Rolling Contact
J. Tribol. October 2005, 127(4): 713–721.
doi: https://doi.org/10.1115/1.2033898
Topics:
Deformation
,
Finite element analysis
,
Plasticity
,
Rails
,
Rolling contact
,
Stress
,
Wheels
,
Pressure
,
Shear (Mechanics)
,
Simulation
Virtual Texturing: Modeling the Performance of Lubricated Contacts of Engineered Surfaces
J. Tribol. October 2005, 127(4): 722–728.
doi: https://doi.org/10.1115/1.2000273
Topics:
Lubrication
,
Modeling
,
Texture (Materials)
,
Stress
,
Density
,
Film thickness
,
Design
,
Tribology
Elastohydrodynamic Lubrication Modeling of Artificial Hip Joints Under Steady-State Conditions
J. Tribol. October 2005, 127(4): 729–739.
doi: https://doi.org/10.1115/1.1924460
Topics:
Elastohydrodynamic lubrication
,
Film thickness
,
Lubrication
,
Pressure
,
Stress
,
Steady state
,
Modeling
,
Hip joint prostheses
,
Bearings
,
Physiology
The Quantification of Physiologically Relevant Cross-Shear Wear Phenomena on Orthopaedic Bearing Materials Using the MAX-Shear Wear Testing System
J. Tribol. October 2005, 127(4): 740–749.
doi: https://doi.org/10.1115/1.2000272
Topics:
Bearings
,
Damage
,
Shear (Mechanics)
,
Wear
,
Wear testing
,
Testing
,
Friction
Transient Three-Dimensional Solution for Thermoelastic Displacement Due to Surface Heating and Convective Cooling
J. Tribol. October 2005, 127(4): 750–755.
doi: https://doi.org/10.1115/1.1924574
Topics:
Convection
,
Cooling
,
Displacement
,
Heat
,
Heating
,
Thermoelasticity
,
Transients (Dynamics)
,
Temperature
Frictionally Excited Thermoelastic Instabilities of Annular Plates Under Thermal Pre-Stress
J. Tribol. October 2005, 127(4): 756–765.
doi: https://doi.org/10.1115/1.2000980
Topics:
Eigenvalues
,
Feedback
,
Friction materials
,
Heat
,
Stress
,
Thermoelasticity
,
Plates (structures)
,
Deflection
,
Membranes
,
Damping
Effects of Lubricants on the Friction and Wear Properties of PTFE and POM
J. Tribol. October 2005, 127(4): 766–775.
doi: https://doi.org/10.1115/1.2005276
Topics:
Friction
,
Stress
,
Wear
,
Lubrication
,
Polymers
,
Steel
,
Lubricants
Vibration Monitoring and Damage Quantification of Faulty Ball Bearings
J. Tribol. October 2005, 127(4): 776–783.
doi: https://doi.org/10.1115/1.2033899
Topics:
Ball bearings
,
Bearings
,
Damage
,
Poincaré maps
,
Vibration
,
Rotors
Probabilistic Main Bearing Performance for an Internal Combustion Engine
J. Tribol. October 2005, 127(4): 784–792.
doi: https://doi.org/10.1115/1.2000268
Topics:
Bearings
,
Design
,
Engines
,
Sensitivity analysis
,
Probability
,
Pressure
,
Algorithms
,
Optimization
An Average Flow Model of the Reynolds Roughness Including a Mass-Flow Preserving Cavitation Model
J. Tribol. October 2005, 127(4): 793–802.
doi: https://doi.org/10.1115/1.2005307
Topics:
Cavitation
,
Flow (Dynamics)
,
Surface roughness
,
Pressure
CFD Analysis of a Low Friction Pocketed Pad Bearing
J. Tribol. October 2005, 127(4): 803–812.
doi: https://doi.org/10.1115/1.2032990
Topics:
Bearings
,
Computational fluid dynamics
,
Friction
,
Pressure
,
Cavitation
An Experimental Study of Journal Bearing Lubrication Effected by Journal Misalignment as a Result of Shaft Deformation Under Load
J. Tribol. October 2005, 127(4): 813–819.
doi: https://doi.org/10.1115/1.2033007
Topics:
Bearings
,
Deformation
,
Film thickness
,
Journal bearings
,
Lubrication
,
Pressure
,
Stress
,
Temperature
,
Friction
Numerical Analysis of a Journal Bearing With a Heterogeneous Slip/No-Slip Surface
J. Tribol. October 2005, 127(4): 820–825.
doi: https://doi.org/10.1115/1.2033897
Topics:
Bearings
,
Friction
,
Journal bearings
,
Leakage
,
Numerical analysis
,
Stress
,
Boundary-value problems
Experimental Evaluation of Piston-Assembly Friction Under Motored and Fired Conditions in a Gasoline Engine
J. Tribol. October 2005, 127(4): 826–836.
doi: https://doi.org/10.1115/1.1924459
Topics:
Engines
,
Friction
,
Manufacturing
,
Pistons
,
Lubricants
,
Temperature
,
Cylinders
Grain Flow for Rough Surfaces Considering Grain/Grain Collision Elasticity
J. Tribol. October 2005, 127(4): 837–844.
doi: https://doi.org/10.1115/1.2005287
Topics:
Collisions (Physics)
,
Flow (Dynamics)
,
Surface roughness
,
Elasticity
,
Lubrication
Effects of Rolling Friction of the Balancing Balls on the Automatic Ball Balancer for Optical Disk Drives
J. Tribol. October 2005, 127(4): 845–856.
doi: https://doi.org/10.1115/1.2032992
Topics:
Disks
,
Rolling friction
,
Steady state
,
Vibration
,
Rotors
Development of Friction Drive Transmission
J. Tribol. October 2005, 127(4): 857–864.
doi: https://doi.org/10.1115/1.2032993
Statistical Distribution of Tapered Roller Bearing Fatigue Lives at High Levels of Reliability
J. Tribol. October 2005, 127(4): 865–870.
doi: https://doi.org/10.1115/1.2000981
Friction Control of Active-Head Slider During Flying Height Adjustment
J. Tribol. October 2005, 127(4): 871–877.
doi: https://doi.org/10.1115/1.2000266
Optimization of Air Bearing Contours for Shock Performance of a Hard Disk Drive
J. Tribol. October 2005, 127(4): 878–883.
doi: https://doi.org/10.1115/1.2000979
Topics:
Air bearings
,
Design
,
Disks
,
Optimization
,
Shock (Mechanics)
,
Genetic algorithms
,
Steady state
Technical Briefs
A Compact Model for Spherical Rough Contacts
J. Tribol. October 2005, 127(4): 884–889.
doi: https://doi.org/10.1115/1.2000982
Topics:
Deformation
,
Pressure
,
Surface roughness
Influence of Contact Pressure on Central and Minimum Film Thickness Within Ultrathin Film Lubricated Contacts
J. Tribol. October 2005, 127(4): 890–892.
doi: https://doi.org/10.1115/1.2032991
Topics:
Film thickness
,
Lubricants
,
Pressure
,
Thin films
,
Interferometry
Modified Reynolds Equation for Non-Newtonian Fluid With Rheological Model in Frequency Domain
J. Tribol. October 2005, 127(4): 893–898.
doi: https://doi.org/10.1115/1.2033005
Topics:
Fluids
,
Lubricants
,
Lubrication
,
Non-Newtonian fluids
,
Pressure
,
Relaxation (Physics)
,
Rheology
,
Shear (Mechanics)
,
Stress
,
Viscosity
The Effect of Periodic Textures on the Static Characteristics of Thrust Bearings
J. Tribol. October 2005, 127(4): 899–902.
doi: https://doi.org/10.1115/1.2033896
Topics:
Bearings
,
Friction
,
Shapes
,
Texture (Materials)
,
Thrust bearings
,
Stress
,
Cavitation
Email alerts
RSS Feeds
Leakage Control Mechanisms and Strategies for Hydraulically Driven Controllable Rod Seals
J. Tribol (April 2025)
Flow Characteristics of Asymmetric Plunger Pairs in High-Pressure Plunger Pumps
J. Tribol (April 2025)