An approach is developed to analyze the multiharmonic forced response of large-scale finite element models of bladed disks taking account of the nonlinear forces acting at the contact interfaces of blade roots. Area contact interaction is modeled by area friction contact elements which allow for friction stresses under variable normal load, unilateral contacts, clearances, and interferences. Examples of application of the new approach to the analysis of root damping and forced response levels are given and numerical investigations of effects of contact conditions at root joints and excitation levels are explored for practical bladed disks.
Issue Section:
Technical Papers
Keywords:
damping,
mechanical contact,
blades,
discs (structures),
finite element analysis,
friction
1.
Kenny
, B.
, Patterson
, E. A.
, Said
, M.
, and Aradhya
, K. S. S.
, 1991, “Contact Stress Distributions in a Turbine Disk Dovetail Type Joint—A Comparison of Photoelastic and Finite Element Results
,” Strain J. Brit. Soc. Strain Measurement
0039-2103, 27
, pp. 21
–24
.2.
Meguid
, S. A.
, Refaat
, M. H.
, and Papanikos
, P.
, 1996, “Theoretical and Experimental Studies of Structural Integrity of Dovetail Joints in Aeroengine Disks
,” J. Mater. Process. Technol.
0924-0136, 56
, pp. 668
–677
.3.
Papanikos
, P.
, Meguid
, S. A.
, and Stjepanovic
, Z.
, 1998, “Three-Dimensional Nonlinear Finite Element Analysis of Dovetail Joints in Aeroengine Disks
,” Finite Elem. Anal. Design
0168-874X, 29
, pp. 173
–186
.4.
Sinclair
, G. B.
, Cormier
, N. G.
, Griffin
, J. H.
, and Meda
, G.
, 2002, “Contract Stresses in Dovetail Attachments: I—Finite Element Modeling
,” Trans. ASME: J. Eng. Gas Turbines Power
0742-4795, 124
, pp. 182
–189
.5.
Pierre
, C.
, Ferri
, A. A.
, and Dowell
, E. H.
, 1985, “Multiharmonic Analysis of Dry Friction Damped Systems Using an Incremental Harmonic Balance Method
,” Trans. ASME, J. Appl. Mech.
0021-8936, 52
, pp. 958
–964
.6.
Wang
, J. H.
, and Chen
, W. K.
, 1993, “Investigation of the Vibration of a Blade With Friction Damper by HBM
,” Trans. ASME: J. Eng. Gas Turbines Power
0742-4795, 115
, pp. 294
–299
.7.
Yang
, B.-D.
, and Menq
, C.-H.
, 1997, “Modelling of Friction Contact and its Application to the Design of Shroud Contact
,” Trans. ASME: J. Eng. Gas Turbines Power
0742-4795, 119
, pp. 958
–963
.8.
Sanliturk
, K. Y.
, Imregun
, M.
, and Ewins
, D. J.
, 1997, “Harmonic Balance Vibration Analysis of Turbine Blades With Friction Dampers
,” Trans. ASME, J. Vib. Acoust.
1048-9002, 119
, pp. 96
–103
.9.
Berthillier
, M.
, Dupont
, C.
, Mondal
, R.
, and Barrau
, R. R.
, 1998, “Blades Forced Response Analysis With Friction Dampers
,” Trans. ASME, J. Vib. Acoust.
1048-9002, 120
, pp. 468
–474
.10.
Szwedowicz
, J.
, Sextro
, W.
, Visser
, R.
, and Masserey
, P.
, 2003, “On Forced Vibration of Shrouded Turbine Blades
,” ASME Paper No. GT-2003-38808.11.
Petrov
, E. P.
, 2004, “A Method for Use of Cyclic Symmetry Properties in Analysis of Nonlinear Multiharmonic Vibrations of Bladed Disks
,” ASME J. Turbomach.
0889-504X, 126
, pp. 175
–183
.12.
Nacivet
, S.
, Pierre
, C.
, Thouverez
, F.
, and Jezequel
, L.
, 2003, “A Dynamic Lagrangian Frequency-Time Method for the Vibration of Dry-Friction-Damped Systems
,” J. Sound Vib.
0022-460X, 265
, pp. 201
–219
.13.
Petrov
, E. P.
, and Ewins
, D. J.
, 2004, “Method for Analysis of Nonlinear Multiharmonic Vibration of Bladed Disks Mistuned by Scatters in Characteristics of Friction Contact Interfaces and Blades
,” ASME Paper No. GT2004-53891.14.
Petrov
, E. P.
, and Ewins
, D. J.
, 2003, “Analytical Formulation of Friction Interface Elements for Analysis of Nonlinear Multiharmonic Vibrations of Bladed Disks
,” ASME J. Turbomach.
0889-504X, 125
, pp. 364
–371
.15.
Craig
, R. R.
, Jr., and Bampton
, M. C. C.
, 1968, “Coupling of Substructures for Dynamic Analysis
,” AIAA J.
0001-1452, 6
(7
), pp. 1313
–1319
.16.
Petrov
, E. P.
, and Ewins
, D. J.
, 2004, “Generic Friction Models for Time-Domain Vibration Analysis of Bladed Disks
,” ASME J. Turbomach.
0889-504X, 126
, pp. 184
–192
.17.
Green
, J. S.
, 2001, “An Overview of a European Collaborative Programme for Forced Response
,” 6th National Turbine Engine High Cycle Fatigue Conference
, Jacksonville, FL
.18.
Aeromechanical Design of Turbine Blades
(ADTurB), Project funded by the European Community under the Industrial and Material Technologies Programme (Brite-EuRam III), Contract number: BRPR-CT95-0124, ADTurB Synthesis Report, 2001, 17
pp.Copyright © 2006
by American Society of Mechanical Engineers
You do not currently have access to this content.
