Use of computational fluid dynamics (CFD) to model the complex, 3D disk cavity flow and heat transfer in conjunction with an industrial finite element analysis (FEA) of turbine disk thermomechanical response during a full transient cycle is demonstrated. The FEA and CFD solutions were coupled using a previously proposed efficient coupling procedure. This iterates between FEA and CFD calculations at each time step of the transient solution to ensure consistency of temperature and heat flux on the appropriate component surfaces. The FEA model is a 2D representation of high pressure and intermediate pressure (IP) turbine disks with surrounding structures. The front IP disk cavity flow is calculated using 45 deg sector CFD models with up to 2.8 million mesh cells. Three CFD models were initially defined for idle, maximum take-off, and cruise conditions, and these are updated by the automatic coupling procedure through the 13,000 s full transient cycle from stand-still to idle, maximum take-off, and cruise conditions. The obtained disk temperatures and displacements are compared with an earlier standalone FEA model that used established methods for convective heat transfer modeling. It was demonstrated that the coupling could be completed using a computer cluster with 60 cores within about 2 weeks. This turn around time is considered fast enough to meet design phase requirements, and in validation, it also compares favorably to that required to hand-match a FEA model to engine test data, which is typically several months.
Skip Nav Destination
e-mail: zixiang.sun@surrey.ac.uk
Article navigation
January 2012
Research Papers
Coupled Aerothermomechanical Simulation for a Turbine Disk Through a Full Transient Cycle
Zixiang Sun,
Zixiang Sun
Thermo-Fluid Systems UTC, School of Engineering,
e-mail: zixiang.sun@surrey.ac.uk
University of Surrey
, Guildford, Surrey, GU2 7XH, UK
Search for other works by this author on:
John W. Chew,
John W. Chew
Thermo-Fluid Systems UTC, School of Engineering,
University of Surrey
, Guildford, Surrey, GU2 7XH, UK
Search for other works by this author on:
Nicholas J. Hills,
Nicholas J. Hills
Thermo-Fluid Systems UTC, School of Engineering,
University of Surrey
, Guildford, Surrey, GU2 7XH, UK
Search for other works by this author on:
Leo Lewis,
Leo Lewis
Rolls-Royce plc
, P.O. Box 31, Derby, DE24 8BJ, UK
Search for other works by this author on:
Christophe Mabilat
Christophe Mabilat
Department of Fluid Mechanics,
Atkins
, Epsom, Surrey, KT18 5BW, UK
Search for other works by this author on:
Zixiang Sun
Thermo-Fluid Systems UTC, School of Engineering,
University of Surrey
, Guildford, Surrey, GU2 7XH, UKe-mail: zixiang.sun@surrey.ac.uk
John W. Chew
Thermo-Fluid Systems UTC, School of Engineering,
University of Surrey
, Guildford, Surrey, GU2 7XH, UK
Nicholas J. Hills
Thermo-Fluid Systems UTC, School of Engineering,
University of Surrey
, Guildford, Surrey, GU2 7XH, UK
Leo Lewis
Rolls-Royce plc
, P.O. Box 31, Derby, DE24 8BJ, UK
Christophe Mabilat
Department of Fluid Mechanics,
Atkins
, Epsom, Surrey, KT18 5BW, UKJ. Turbomach. Jan 2012, 134(1): 011014 (11 pages)
Published Online: May 27, 2011
Article history
Received:
September 10, 2010
Revised:
October 20, 2010
Online:
May 27, 2011
Published:
May 27, 2011
Citation
Sun, Z., Chew, J. W., Hills, N. J., Lewis, L., and Mabilat, C. (May 27, 2011). "Coupled Aerothermomechanical Simulation for a Turbine Disk Through a Full Transient Cycle." ASME. J. Turbomach. January 2012; 134(1): 011014. https://doi.org/10.1115/1.4003242
Download citation file:
Get Email Alerts
Related Articles
Structural Deflection's Impact in Turbine Stator Well Heat Transfer
J. Eng. Gas Turbines Power (April,2017)
Coupled Aerothermal Modeling of a Rotating Cavity With Radial Inflow
J. Eng. Gas Turbines Power (March,2016)
Innovative Turbine Stator Well Design Using a Kriging-Assisted Optimization Method
J. Eng. Gas Turbines Power (July,2017)
The Application of System CFD to the Design and Optimization of High-Temperature Gas-Cooled Nuclear Power Plants
J. Eng. Gas Turbines Power (May,2008)
Related Chapters
List of Commercial Codes
Introduction to Finite Element, Boundary Element, and Meshless Methods: With Applications to Heat Transfer and Fluid Flow
Summary
Heat Transfer & Hydraulic Resistance at Supercritical Pressures in Power Engineering Applications
Control and Operational Performance
Closed-Cycle Gas Turbines: Operating Experience and Future Potential