The wide application of active magnetic bearing (AMB) requires an aseismic evaluation with respect to AMB rotor vibrations caused by actual earthquakes. A flexible rotor supported by AMB is selected for this purpose. A shaking simulation obtained using the quasi-modal model and the actual Kobe earthquake was completed. A corresponding test rotor was excited by seismic waves and the resulting vibration was measured for the vibration evaluation. In order to reduce the response severity against earthquakes, we propose an additional feed forward control method which is proportional to the signal detected by the accelerometers attached to the bearing housings. Since this additional control can cancel rotor vibration generated by the earthquakes, AMB rotor vibrations are successfully suppressed at a low level.
Skip Nav Destination
Article navigation
January 2002
Technical Papers
Aseismic Vibration Control of Flexible Rotors Using Active Magnetic Bearing
Osami Matsushita,
Osami Matsushita
Mechanical Engineering Department, National Defense Academy, 1-10-20 Hashirimizu, Yokosuka, Kanagawa, 239-8686, Japan
Search for other works by this author on:
Toshio Imashima,
Toshio Imashima
Mechanical Engineering Department, National Defense Academy, 1-10-20 Hashirimizu, Yokosuka, Kanagawa, 239-8686, Japan
Search for other works by this author on:
Yoshitaka Hisanaga,
Yoshitaka Hisanaga
Mechanical Engineering Department, National Defense Academy, 1-10-20 Hashirimizu, Yokosuka, Kanagawa, 239-8686, Japan
Search for other works by this author on:
Hiroki Okubo
Hiroki Okubo
Mechanical Engineering Department, National Defense Academy, 1-10-20 Hashirimizu, Yokosuka, Kanagawa, 239-8686, Japan
Search for other works by this author on:
Osami Matsushita
Mechanical Engineering Department, National Defense Academy, 1-10-20 Hashirimizu, Yokosuka, Kanagawa, 239-8686, Japan
Toshio Imashima
Mechanical Engineering Department, National Defense Academy, 1-10-20 Hashirimizu, Yokosuka, Kanagawa, 239-8686, Japan
Yoshitaka Hisanaga
Mechanical Engineering Department, National Defense Academy, 1-10-20 Hashirimizu, Yokosuka, Kanagawa, 239-8686, Japan
Hiroki Okubo
Mechanical Engineering Department, National Defense Academy, 1-10-20 Hashirimizu, Yokosuka, Kanagawa, 239-8686, Japan
Contributed by the Technical Committee on Vibration and Sound for publication in the JOURNAL OF VIBRATION AND ACOUSTICS. Manuscript received July 2000; Revised July 2001. Associate Editor: G. T. Flowers
J. Vib. Acoust. Jan 2002, 124(1): 49-57 (9 pages)
Published Online: July 1, 2001
Article history
Received:
July 1, 2000
Revised:
July 1, 2001
Citation
Matsushita , O., Imashima , T., Hisanaga , Y., and Okubo, H. (July 1, 2001). "Aseismic Vibration Control of Flexible Rotors Using Active Magnetic Bearing ." ASME. J. Vib. Acoust. January 2002; 124(1): 49–57. https://doi.org/10.1115/1.1423633
Download citation file:
Get Email Alerts
Related Articles
On the Control of Synchronous Vibration in Rotor/Magnetic Bearing Systems Involving Auxiliary Bearing Contact
J. Eng. Gas Turbines Power (April,2004)
An Adaptive Multi-Objective Controller for Flexible Rotor and Magnetic Bearing Systems
J. Dyn. Sys., Meas., Control (May,2011)
Multi-State Transient Rotor Vibration Control Using Sampled Harmonics
J. Vib. Acoust (April,2002)
Related Proceedings Papers
Related Chapters
Regression Based Neural Network for Studying the Vibration Control of the Rotor Blade for Micro-Unmanned Helicopter
International Conference on Mechanical and Electrical Technology, 3rd, (ICMET-China 2011), Volumes 1–3
Intelligent Vibration Control of Structures against Earthquakes Using Hybrid Damper
International Conference on Mechanical and Electrical Technology 2009 (ICMET 2009)
Research Tools
Bearing Dynamic Coefficients in Rotordynamics: Computation Methods and Practical Applications